AMX Endeleo Multi-Format Receiver UDM-RX02 Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 108

background image

UDM-RX02 Wiring and Connections

15

UDM-0102 and UDM-RX02 Operation/Reference Guide

UDM-RX02 Wiring and Connections

Overview

There are no components on the front panel of the UDM-RX02.

All of the connectors and ports are located on the rear panel of the UDM-RX02 (FIG. 12):

24 DC Power Input

The DC IN power input is a 2.1mm barrel-style DC power socket, for use with the included (24VDC, 1.25A)
UDM-PS power supply.

Using the UDM-PS External Power Supply

Normally, the UDM-RX02 is powered remotely by the UDM-0102 Hub. However, in cases involving long
cable runs, it may be necessary to power the UDM-RX02 locally, via the included UDM-PS power supply.

Typically, the external power supply is not needed for cable runs of 650’ (200m) or less, but at greater
distances it may improve image quality. The best way to determine wether the external power supply is needed
is to observe the quality of the image received. If there is noticeable distortion, then connecting the UDM-PS
power supply may provide a visible improvement.



To connect the UDM-PS power supply to the UDM-RX02, insert the barrel connector into the 24
DC connector on the UDM-RX02.



To power down the UDM-RX02, remove the barrel connector of the power supply from the power
connector and then remove the Ethernet cable from the UDM Hub connector.

To connect the UDM-PS power supply to an UDM-RX02N that is currently connected to a UDM-0102 (via
the UDM port):

1.

Disconnect the CAT5/5e/6 cable from the UDM HUB port to power the unit down

2.

Connect the UDM-PS power supply and reconnect the CAT5/5e/6 cable to the UDM HUB port.

FIG. 12

UDM-RX02 - rear panel components

Serial port (RJ12)

IR receive port

Digital audio output

RCA audio out

S-Video video out

Power connector

UDM HUB port (RJ45) -

IR transmit port

VGA video

Component
video out

out

Composite video out

connects to the "UDM" (RJ45)
port on the UDM-0102

As a Class 1 appliance, ensure the device is connected to a main socket outlet with a
protective grounding connection.

Disconnecting the UDM-PS power supply will not power down the UDM-RX02 if the
Ethernet connection to the UDM-0102 is intact.

«
...
27
28
29
30
31
...
»

Содержание Endeleo Multi-Format Receiver UDM-RX02













































































































Отзывы:

Нет отзывов

Похожие инструкции для Endeleo Multi-Format Receiver UDM-RX02

Бренд: Icom Страницы: 36

AMG3787E-1-DR-1550-HP

Бренд: AMG Страницы: 12

Бренд: Trust Страницы: 9

Бренд: Denon Страницы: 14

Бренд: CAME Страницы: 24

Бренд: Boss Audio Systems Страницы: 12

Бренд: Aiwa Страницы: 37

Бренд: Yaesu Страницы: 20

Бренд: Beltek Страницы: 16

Бренд: XY-AUTO Страницы: 23

Бренд: Kia Страницы: 26

Бренд: PERDIX Страницы: 4

Бренд: Pyle Страницы: 12

Бренд: Airline Страницы: 37

Бренд: Pyle Страницы: 4

Бренд: Boss Audio Systems Страницы: 8

Бренд: Farpointe Data Страницы: 2

Бренд: Alpine Страницы: 44

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды