AMX Endeleo Multi-Format Receiver UDM-RX02, Руководство по эксплуатации/справочник

Страница: 74 / 108

Configuration - Protocols Page
60 UDM-0102 and UDM-RX02 Operation/Reference Guide
10.
Press the corresponding button on the remote again. The IR code has now been added and assigned an
action.
IR Learning With a Device’s Remote Control
IR protocols can be learned by the UDM-0102 by using the device’s remote control to program its commands
into the UDM-0102.
1.
Connect the 3.5mm jack of the IR03 External IR Receiver Module to the IR Rx connection on the Hub
(see FIG. 7 on page 8).
2.
Run the cable and attach the IR Receiver Module within IR range of any remote control devices to be
used.
3.
In the Protocols page, click on the IR Protocol drop-down menu and select New (FIG. 76). This invokes
the Name text field.
4.
Enter a name for the IR protocol in the Name text field (FIG. 73).
5.
Click Initialize . This invokes the Action drop-down menu (FIG. 74).
6.
Select an action to be performed from the Action drop-down menu. This invokes the Step 1 option
(FIG. 75).
The UDM-0102 can learn approximately 128 IR commands, depending on the actual
command length and protocol used.
The device’s own remote control can still be used locally at the device to control the
device.
FIG. 76 IR Protocol drop-down menu
FIG. 77 Naming the new IR Protocol
FIG. 78 Creating an IR command for the action