AMX Endeleo Multi-Format Receiver UDM-RX02, Руководство по эксплуатации/справочник

Страница: 48 / 108

Configuration - Setup Page
34 UDM-0102 and UDM-RX02 Operation/Reference Guide
Network Configuration

The default IP address is: 192.168.0.96

The default UDP Port is: 2008
1.
The following Network Configuration options must be configured (FIG. 37):
a.
Hub IP Address, Subnet Mask and Default Gateway
b.
UDP Port
c.
Hub name (maximum of 30 characters).
2.
Once the network environment has been configured, click on Update .
Date and Time Configuration
The Setup page is also used to set up the Hub date and time , which is used for scheduling (FIG. 38).
1.
Enter the desired values for the current Time and Date .
2.
Click Set Time to apply changes.
Setup Page Options (Cont.)
Date / Time Settings
• Date: Enter the current date in this set of text fields, in the format dd-mm-yy .
Click the Set Time link to update the date setting.
• Time: Enter the current time in this set of text fields, in 24-hour format.
Click the Set Time link to update the time setting.
Restore Options
• Restore configuration
on power up:
Select this option to restore network configuration and port configuration settings
on when the UDM-0102 is powered-up.
Default = enabled .
• Restore connections on
power up:
Select this option to ensure that inputs are transmitted to the outputs (or ports) on
boot up.
Default = enabled .
• Reset Hub: Click this option to reset the UDM-0102 from the Browser interface.
A power down of the Hub must be performed to complete the reset procedure.
The UDM-0102 does not support DHCP - configure a static IP Address.
FIG. 37
Network Configuration options
All changes are immediate - once the IP address of the Hub has been changed
redirect the web browser to the changed address.
FIG. 38 Date and Time Settings