AMX Endeleo Multi-Format Receiver UDM-RX02, Руководство по эксплуатации/справочник

Страница: 54 / 108

Configuration - Devices Page
40 UDM-0102 and UDM-RX02 Operation/Reference Guide
Configuring IR-Controlled Devices 1 and 2
Devices "1" and "2" correspond to the devices connected to the IRTX1 and IRTX2 (IR output) connectors on
the rear panel of the UDM-0102 (see FIG. 2):
Use an IR01 IR Emitter Module (FG-IR01 - not included) to connect each device to the UDM-0102. The IR01
modules connect the IRTX1/2 ports to the IR receivers on the devices, to allow them to receive IR control
signals directly from the UDM-0102.

The device connected to IRTX1 represents Device "1" on the Devices page.

The device connected to IRTX2 represents Device "2" on the Devices page.
1.
Enter a name for each device in the Name text fields.
2.
Select the appropriate IR protocol from the Protocol drop-down menu. The protocols available for
selection here are defined in the Protocols page (see the Configuration - Protocols Page section on
page 51).
Devices Page - Control Bar Options
The options in the Control Bar (FIG. 49) allow you to schedule commands to these devices, or send commands
directly to any or all of these devices.
Devices Page Options (Cont.)
Control Bar: The options in the Control Bar allow you to schedule commands to these devices, or send
commands directly to any or all of these devices. See the
Devices Page - Control Bar
Options (below).
• Control drop-
down menu:
Select a control (command) to schedule and/or send to the included devices. Included
devices are all devices that have the
Include option selected.
• Schedule: Click to open the Schedule page, to schedule the selected command.
• Send to Included: Click to send the selected command to all devices that have the Include option selected.
FIG. 48 UDM-0102 (rear panel) - IRTX (IR output) Connectors "IRTX1" and "IRTX2"
FIG. 49 Devices page - Control Bar
IRTX1 (Device 1)
IRTX2 (Device 2)
Command drop-down menu
Click to create a
scheduled event
Click to send (execute)
the selected command