AMX Endeleo Multi-Format Receiver UDM-RX02, Руководство по эксплуатации/справочник

Страница: 89 / 108

UDM-RC10 Remote Control
75 UDM-0102 and UDM-RX02 Operation/Reference Guide
UDM-RC10 Remote Control
Compensating Video Via the UDM-RC10 Remote
Video can also be compensated using the UDM-RC10 IR Engineering Remote Control (FIG. 91).
1.
Ensure the IR03 External IR Receiver Module (FG-IR03) is attached to the UDM-RX02 at the IRRX port
(FIG. 91).
2.
To enter compensation mode, push the ESC and B buttons on the remote control.
3.
The amber LED at the Cat5 port on the UDM-RX02 will start to flash, indicating the UDM-RX02 is in
compensation mode.
4.
Use the buttons on the remote control to adjust appropriately the following up or down;

Sharpness

Gain

Red, Green and Blue.
5.
Once the image displayed is of an acceptable quality, push the A button on the remote control to exit
compensation mode.
FIG. 91 UDM-RX02 with IR03 IR Receiver Module
IR RX port
UDM-RX02
Amber LED indicates that UDM-RX02 is in Compensation mode
IR03 IR Receiver Module (FG-IR03)
The compensation settings will be specific to this UDM-RX02 and stored internally
(for example, if this UDM-RX02 is replaced or swapped out the compensation
settings will travel with the UDM-RX02). It may therefore be necessary to re-
compensate the UDM-RX02 / replacement UDM-RX02 if this UDM-RX02 is to be
used elsewhere or is being replaced.