AMX Endeleo Multi-Format Receiver UDM-RX02 Скачать руководство пользователя страница 78

Страница: 78 / 108

Upgrading Firmware

UDM-0102 and UDM-RX02 Operation/Reference Guide

Downloading New Firmware From WWW.AMX.COM

Firmware updates are available for download via the relevant product page in the online catalog:

Go to www.amx.com, and log in as a Dealer.

Open the UDM-0102 Product Page. The link to the latest firmware version for this product is included in
the right-hand pane, under "

Firmware Files

" (FIG. 81):

Click the link under

Firmware Files

UDM-0102 Firmware

") to download the Firmware (ZIP) file.

The

AMX License Agreement

is displayed. Read this agreement, and click

I Accept

to proceed with the

download, or

Back

to return to the previous page.

Open the ZIP file, and open the "README.TXT" file for instructions on using the included BAT file to
load the new Firmware (*.ROM) Files on the UDM-0102 (FIG. 82).

FIG. 81

UDM-0102 Product Page (www.amx.com)

FIG. 82

UDM-0102 Firmware ZIP File

Содержание Endeleo Multi-Format Receiver UDM-RX02













































































































Результаты поиска

Содержание Endeleo Multi-Format Receiver UDM-RX02

Отзывы:

Похожие инструкции для Endeleo Multi-Format Receiver UDM-RX02

Бренды по названию

Популярные бренды

AMX Endeleo Multi-Format Receiver UDM-RX02, Руководство по эксплуатации/справочник

Результаты поиска

Содержание Endeleo Multi-Format Receiver UDM-RX02

Отзывы:

Похожие инструкции для Endeleo Multi-Format Receiver UDM-RX02

Бренды по названию

Популярные бренды