AMX Endeleo Multi-Format Receiver UDM-RX02, Руководство по эксплуатации/справочник

Страница: 41 / 108

UDM-0102 Configuration - Status Page
27 UDM-0102 and UDM-RX02 Operation/Reference Guide

The availability of the User Control feature depends on the functionality of the remote controller
currently selected. For example, User Control is not available for Sky+, Tivo or DirecTV remotes.
If any of these are selected as the
Remote type , the User Control option is not displayed on the
Status page.
To assign IR User controls to an input device:
1.
Select the input device for which you will assign a control from the Input drop-down menu.
2.
Click on the User control link at the top of the Status page (FIG. 26):
This link opens the User Control page (FIG. 27).
This page consists of several columns:

Key - This column represents the keys on the UDM-RC02 Remote Control. The following table
provides the key layout for the RC02:

Input - This column indicates the Input Device to which each Key/Control is associated. Select an
Input Device from the drop-down menu. The devices available for selection are defined in the
Devices page (see the Configuration - Devices Page section on page 39 for details). “Input” refers
to devices connected directly to the UDM Hub (Inputs A-B),

Control - IR Commands are selected from the Control drop-down menu (provided for each Key).
FIG. 26 Status Page - Selecting User control
FIG. 27 User Control page (with UDM-RC02 Remote Controller selected)
UDM-RC02 Keys Description
1, 2 Select UDM-0102 Inputs 1 and 2
0, 3-9 Pass-through
C0-C8 Programmed as needed to control the display or the input source
pause, play, stop, rwd and fwd Pass-through
Each Key represents a button on the selected Remote Controller
Select an Input (Input Device) from the drop-down menu for each Key
Select a Control (IR command) from the drop-down menu for each Key
Click to issue the last command defined
Select Port or Device as the recipient
of the Control for each Key
Select a defined Schedule to
which each Control will be added
Click to reset the
Remote Controller
to it’s default
key assignments
Click to assign this key as
a pass-through command