AMX Endeleo Multi-Format Receiver UDM-RX02, Руководство по эксплуатации/справочник

Страница: 49 / 108

Configuration - Setup Page
35 UDM-0102 and UDM-RX02 Operation/Reference Guide
Refreshing the Date and Time Display
Clicking on the date and time displayed at the top of the screen refreshes the clock to the current time. This can
be useful before creating a scheduled event (FIG. 39).
Restore Options
To ensure the configuration settings for the Hub are retained each time the Hub boots, ensure the Restore
configuration on power up and Restore connections on power up options (at the bottom of the Setup page)
have been enabled (FIG. 40).
Restoring Configuration and Connections
To ensure network configuration and port configuration are restored on boot up select Restore configuration
on power up option (see FIG. 40).
Restoring Connections On Power Up
To ensure inputs are transmitted to the outputs (or ports) on boot up select the Restore connections on power
up option (see FIG. 40).
Resetting the UDM-0102
Where appropriate the Hub can be reset from the Browser interface:
1.
In the Setup page, click the Reset Hub button (FIG. 41).
The UDM-0102’s network connection will be lost temporarily, and video displays will switch off then on
again very quickly.
2.
Restart the Hub.
FIG. 39 Hub Date and Time display
FIG. 40 Restore options
Click to refresh Date and Time display
If the Restore Options are disabled, the Hub configuration and connections will need
to be re-configured if the UDM-0102 is reset or rebooted.
FIG. 41 Reset Hub button
A power down of the Hub must be performed to complete the reset procedure.