AMX Endeleo Multi-Format Receiver UDM-RX02, Руководство по эксплуатации/справочник

Страница: 92 / 108

Video Compensation
78 UDM-0102 and UDM-RX02 Operation/Reference Guide
Advanced Video Compensation
To enable advanced video compensation options, click on the Enable advanced options checkbox, in the Setup
page (FIG. 93).
1.
In the Status page, click on a Port link to access the Port Configuration options for the selected Port.
2.
With the Enable advanced options checkbox selected in the Setup page, the Port Configuration options
include the additional Cable Distance field (FIG. 94):
3.
In the Cable Distance field, enter the approximate distance of the cable run from the UDM-0102 to the
UDM-RX02 (in meters). This value is used to automatically adjust the brightness and sharpness of the
image.
4.
To make manual adjustments to Brightness and Sharpness, click on the Advanced checkbox (see FIG. 94)
to enable the Bright and Sharp fields (FIG. 95):
FIG. 93 Setup Page - Enable advanced options checkbox
FIG. 94 Port Configuration options - with "Enable advanced options" selected in the
Setup page
Enter approximate distance of
the cable run between the UDM
Hub and UDM Receiver in meters
Click to enable "Bright" and "Sharp"
fields for manual adjustments
Click to enable "Dual Output"
mode on this Port
The Cable Distance field is intended primarily for use with VGA cabling in excess of
200 meters (see the Audio & Video Formats/Resolutions/Distance
section on
page 10 ).