AMX Endeleo Multi-Format Receiver UDM-RX02, Руководство по эксплуатации/справочник

Страница: 25 / 108

UDM-0102 Wiring and Connections
11 UDM-0102 and UDM-RX02 Operation/Reference Guide
Connecting an IR-Controlled Device to an IRTX Port
To issue IR commands to the devices connected to IRTX 1/2 ports, an IR01 IR Emitter Module (FG-IR01) is
required:
1.
Connect an IR01cable to the appropriate IRTX port on the UDM-0102.

Ensure that the device connected to IRTX1 is configured as Device 1 in the Devices page.

Ensure that the device connected to IRTX2 is configured as Device 2 in the Devices page.
Refer to the Configuring IR-Controlled Devices 1 and 2 section on page 40 for details.
2.
Run the other end of the cable to the display device, and attach the IR Emitter over the device’s IR sensor.
Once connected, the UDM-0102 can issue IR commands directly to the device(s) via the IR01 IR emitter(s).
IRRX (IR Receiver) Port
The IRRX port is a 3.5mm stereo input port, which allows you to connect an (optional) IR03 External IR
Receiver Module (FG-IR03).
The IRRX port has two purposes:

To learn and create new IR protocols. Refer to the Creating and Learning an IR Protocol section on
page 59 for details.

To control an IR-controlled device via Passthrough mode. Refer to the Passthrough Mode section
on page 29 for information.
Connecting an External IR Receiver Module
If pass-through mode (where a device such as a DVD or VCR can be controlled via an RC-02 remote control)
is required then an IR03 External IR Receiver Module will be needed to pick up IR controls from the remote
control.
An IR03 External IR Receiver Module is also needed if the UDM-RX02’s video compensation is to be done
via a remote control.
DC IN Power Input
The DC IN power input is a 2.1mm barrel-style DC power socket, for use with the included (24VDC, 1.25A)
UDM-PS power supply.
FIG. 10 IR01 IR Emitter Module (FG-IR01)
IR Emitter (installs directly over the
IR receiver on the controlled device)
3.5mm plug connects to
IRTX 1 or IRTX2 port
As a Class 1 appliance, ensure the device is connected to a main socket outlet with a
protective grounding connection.