AMX Endeleo Multi-Format Receiver UDM-RX02, Руководство по эксплуатации/справочник

Страница: 82 / 108

Advanced Administration
68 UDM-0102 and UDM-RX02 Operation/Reference Guide
3.
Type in the following command at the prompt observing the parameters below;
TFTP –i [IP address] get hxxxxx.hub
Where hxxxxxx.hub is the name of the Hub configuration file.
If the name of the Hub Configuration file is not known, typing in h followed by xxx will find the file, as
there is only one file beginning with "h" in the UDM-0102.
Restoring the Configuration file
1.
Run your TFTP client. If using the Windows client, move to step 2.
2.
Start a command session on the PC. Change to the directory where the Hub Configuration file is to be
stored on the PC. For example:
cd\udm and cd\config
3.
Type in the following command at the prompt, observing the parameters below:
TFTP -i [IP address] put hxxxxx.hub
Where hxxxxxx.hub is the name of the Hub configuration file.
Hub configuration file names start with an h .
4.
When complete, close the command window.
Loading the Hub Configuration File
1.
Run your TFTP client. If using the Windows client, move to step 2.
2.
Start a command session on the PC. Change to the directory where the .ROM files are stored on the PC:
e.g. cd\Hub .
3.
Type in the following command at the prompt, observing the parameters below;:
TFTP –i [ip address of UDM Hub] PUT [filename.ROM].
For example, typing in
TFTP –i 192.168.0.96 PUT FUDM129.ROM
will upload the file FUDM129.ROM to the UDM Hub with IP address 192.168.0.96 .
4.
Once the command has been typed in, push Enter to execute the command.
5.
Upload the file to any other ports requiring this upgrade by changing the last 3 digits of the command to
the relevant port number.
For example, type
TFTP –i 192.168.0.96 PUT R26201610800.002
to upload the file to port
2 on the UDM Hub with IP address 192.168.0.96.
6.
The command window can be closed.
Copying Protocols Between UDMs
1.
Once an IR protocol has been learned for a specific port it can simply be copied across to other ports
using the TFTP application and the network port.
2.
First, you must retrieve the IR file from the UDM-0102. IR files all start with an I and use a file extension
to indicate number. These could therefore take the form isonymode1.001, IRtable.001 etc.
3.
At the command prompt use the following command.
TFTP –I [IP address of Hub] GET irtable.001
Where irtable is the user defined name given to the IR code on port 1 and where the .001 file extension
relates to the port number.
Restoring the Hub configuration file can cause the UDM Hub web pages to be
damaged. Follow the direction for loading the web pages to restore the damaged file.
Once protocols have been learned by the Hub through the Web Browser, they will
remain on the Hub. AMX recommends the Web Browser be used at all times to
allocate protocols to UDM-0102s.