AMX Endeleo Multi-Format Receiver UDM-RX02, Руководство по эксплуатации/справочник

Страница: 37 / 108

UDM-0102 Configuration - Status Page
23 UDM-0102 and UDM-RX02 Operation/Reference Guide
Selecting a Remote Control Type
The Remote type option in the Port Configuration page (FIG. 18) allows you to select a specific type of
remote controller to be used for Passthrough control of the Output device.
The remote control types available for selection include:

UDM-RC02

AMX Endeleo

Sky+

Tivo

DirecTV
Renaming the Output Port
By default, (output) Port 1 is named "Port 1". To rename the output Port:
1.
Click the Port 1 hyperlink on the Status page to access the Port Configuration page.
2.
Type directly into the Port name text field.
3.
Click Update to rename the Port.
Compensating Video
Options within the Port Configuration page allow you to compensate (tune) outgoing video signals, for
optimum picture quality.
1.
On the Status page. click on a Port hyperlink to access the Port Configuration options (see FIG. 17 on
page 22).
2.
Adjust Brightness and Sharpness via the Up and Down links.
3.
To add skew delay into any of the video colors, click on the appropriate color hyperlink (FIG. 19).
Port Configuration Options (Cont.)
Bright Up/Down: Once any skew has been eliminated the video should be adjusted for brightness
using a grey scale or equivalent test card.
Click Update to apply changes.
Sharp Up/Down: The sharpness of the video should be adjusted last, to eliminate any over or under
shoot of the video. Horizontal black and white bars are one useful method of tuning
sharpness.
Click Update to apply changes.
Red/Green/Blue skew: Use this set of radio buttons to manually adjust the skew (delay) for any of the video
colors. Initially, the skew control is for
Red . Once the skew for Red is set, click the
Red link to cycle to Blue ; once the skew for Blue is set, click the Blue link to cycle to
Green, etc.
See the Video Compensation section on page 77 for details.
Protocol: Select a control protocol to be used for this Port ( IR or Serial ).
Note that the Protocol setting can also be specified in the Protocols page. See the
Configuration - Protocols Page section on page 51 for details.
FIG. 18 Remote Type drop-down menu
LCD screens will attempt to automatically optimize the video, which can present
issues when adjusting for skew. For best results, use a CRT monitor to compensate
video.