Ametek Thermox WDG Insitu, Руководство пользователя

Страница: 70 / 166

4-14 | Thermox Series 2000 WDG Insitu Analyzer
Analog Output Port
Before you can define any Analog Range key functions, you must
choose whether they will apply to analog output ports 1 or 2 on the
rear of the control unit. If you have the combustibles option, you can
also use analog output ports 3 and 4.
Analog output port 1 is labeled I OUT 1 ; analog output port 2 is labeled I
OUT 2 . If you have the combustibles card option, analog output port 3 is
labeled IOUT3 and analog output port 4 is labeled IOUT4 . Analog output
ports 3 and 4 can only be used for combustibles or methane sensor options.
Selecting an analog output port
1. Select the Analog Range key.
2. Select Current Output #1 or Current Output # 2 . If you have the
combustibles option, you can also select Current Output # 3 or Cur-
rent Output # 4 .
You can then select any of the menu options described in the remainder of
this chapter, and they will apply to the analog output port you selected.
NOTE
