![background image](http://html2.mh-extra.com/html/zeiss/opmi-lumera-700/opmi-lumera-700_instructions-for-use-manual_3325017223.webp)
Instructions for Use
14 Packaging and transport
OPMI LUMERA 700
14.1 Preparing for transport
G-30-1673-en - 14.0 - 2018-07-12
223 / 236
14 Packaging and transport
14.1 Preparing for transport
14.1.1 Placing the device in the transport position
CAUTION!
Risk of crushing caused by rotating support and suspension
arms!
Fingers may be crushed between the stand column and the support
arm as well as between the support arm and the suspension arm.
u
Never touch this area while moving these parts.
Prerequisite
þ
The power switch is off.
Action
1. Remove the power plug from the power outlet.
2. Place the support arm and suspension arm in the following
transport position.
3. For integrated CALLISTO eye Panel PC: place the support arm in
the following transport position and press the locking lever
down.
ð
The integrated CALLISTO eye Panel PC is locked.
Summary of Contents for opmi lumera 700
