Zeiss opmi lumera 700, Instructions For Use Manual, Page: 187 / 236

Instructions for Use 10 Troubleshooting
OPMI LUMERA 700 10.3 Faults (without messages)
G-30-1673-en - 14.0 - 2018-07-12 187 / 236
Fault Cause Remedy
Image on video monitor is too dark,
or there is a high level of noise. Insufficient light.
u
Increase the brightness level of
the illumination.
Incorrect light metering
method selected for the
integrated camera.
u
Activate the "Integral" light
metering method. [
}
162]
For external cameras
u
Remove the fixed stop from the
external camera adapter.
The surgical microscope's motorized
focus or zoom functions are inoper-
ative. Stand electronics failure.
u
Operate the device in manual
mode. [
}
191] Use the manual
zoom on the surgical
microscope.
Motion of suspension arm too stiff. Friction adjustment knob
tightened too firmly.
u
Rotate the [Weight balancing]
rotary knob until the suspension
arm becomes mobile. [
}
111]
The surgery profile cannot be
changed via the configured button
on the handgrip. You are not in the main menu.
u
Return to the main menu.
No video image. Connection cable not properly
connected.
u
Check all connections.
Stand wobbles. Floor not level. Stand base not
appropriately positioned.
u
Reposition the stand base.
[
}
118]
10.3.2 Integrated HD video and image recording faults
Fault Cause Remedy
Data cannot be saved. USB storage device is
defective.
u
Check to make sure the USB
storage device is working.
u
If the USB storage device is not
working properly, replace it.
USB storage format is not
supported.
u
Use USB storage devices with
FAT32 or NTFS.
No storage capacity.
u
Delete data you no longer need.
Note the available storage space
display.
No network connection.
u
Establish a network connection.
[
}
145]
No network authorization.
u
Check to make sure the network
and directories are being
shared.
u
Adjust the read and write
permissions.