Zeiss opmi lumera 700, Instructions For Use Manual, Page: 154 / 236

7 Operation Instructions for Use
OPMI LUMERA 700 7.5 Daily operation
154 / 236 G-30-1673-en - 14.0 - 2018-07-12
CAUTION!
Risk of injury caused by incorrect illumination settings!
Excessive light intensity, long exposure times or using the wrong
filter may lead to retinal damage in the patient’s eye.
u
Use the lowest brightness setting possible.
u
Select an appropriate brightness setting according to the
recommended values provided by ZEISS (see "Maximum
radiation exposure times" [
}
27]). Doing this limits the exposure
intensity and the exposure time.
u
When operating on the eye, use the retina protection filter. The
retina protection filter protects the patient’s eye from unnec-
essary radiation and increases the exposure time.
u
When working on the exterior eye: use the retina protection
device. This will prevent light from entering the pupil.
u
Make sure you select the correct filter for the operation.
CAUTION!
Risk of injury caused by unsupervised device!
Long radiation exposure times while the device is unattended may
lead to retinal damage in the patient's eye.
u
If the light source is on: supervise the device.
Action 1. Open the main menu.
2. Tap the [Light] menu button.
3. Tap the [OPMI light] submenu button.
ð
The "OPMI Light" menu will appear.
4. To set the red reflex illumination: tap the button.
5. To set the mixed light illumination: tap the button.
6. To set the surrounding field illumination: tap the button.
ð
The SCI illumination type will be immediately set on the
device.