Zeiss opmi lumera 700, Instructions For Use Manual

Page: 18 / 236

2 Safety notes Instructions for Use
OPMI LUMERA 700 2.4 Measures and duties of the operator
18 / 236 G-30-1673-en - 14.0 - 2018-07-12
2.4 Measures and duties of the operator
Electrical safety
u
Always switch off the device before connecting it to or discon-
necting it from the power supply, for cleaning its surface, or if
it will not be used for a prolonged period of time.
u
Only connect the device to a power supply that complies with
the values specified on the rating label.
u
Do not use multiple sockets!
u
Do not use extension cables!
u
Do not touch the device if your body is electrostatically charged
and the device is not grounded.
u
Connect the device via the potential equalization connection
(according to IEC 60601-1) to other active devices with the
same ground potential or connect it to a protective ground
connection.
u
Please observe the information on electromagnetic compati-
bility (EMC).
The device contains freely accessible live components. If you
remove the housing, you run the risk of electric shock.
u
Never open the device!
Environmental conditions
u
Make sure that the installation conditions and the operation of
the device comply with the surgical requirements:
• Low vibration
• Clean environment
• Avoid extreme mechanical stress
u
Do not use power-operated devices included in the delivery
package
• in explosive atmospheres,
• at a distance of less than 25 cm from flammable anesthetics or
volatile solvents such as alcohol, benzine or similar substances.
u
Do not use or store the device in damp rooms. Do not expose
the device to water splashes, dripping water or sprayed water.
u
Ensure that fluids cannot enter the device.
Symbols and labels
u
Note the symbols and labels attached to the device!