Zeiss opmi lumera 700, Instructions For Use Manual

Page: 196 / 236

10 Troubleshooting Instructions for Use
OPMI LUMERA 700 10.4 Troubleshooting work
196 / 236 G-30-1673-en - 14.0 - 2018-07-12
If the suspension arm continues to lower on its own, the gas spring
is defective.
3. Inform ZEISS Service!
10.4.7 Increasing mobility of the suspension arm on the
integrated 22" monitor
If the 22" monitor is making undesired swivel movements to the
left or right, the mobility of the suspension arm can be increased.
Tools • M2.5 hex key
• M5 hex key
Action 1. Loosen the securing screw on the support arm. To do this, turn
the securing screw counter clockwise using an M2.5 hex key.
2. Remove the plastic cover on the suspension arm.
3. Tighten the adjustment screw on the suspension arm until the
desired level of mobility is achieved. To do this, turn the
adjustment screw clockwise using an M5 hex key.
4. Retighten the securing screw on the suspension arm. To do
this, turn the securing screw clockwise using an M2.5 hex key.