Zeiss opmi lumera 700, Instructions For Use Manual

Page: 102 / 236

4 Installation Instructions for Use
OPMI LUMERA 700 4.3 Connections
102 / 236 G-30-1673-en - 14.0 - 2018-07-12
4.3.6 Connecting external video devices
External video devices can be connected to devices with an
integrated HD camera. If the device is not equipped with integrated
HD video and image recording, you can connect the optional
MEDIALINK 100 SD video recording tool.
4.3.6.1 Connecting the HD monitor to the integrated HD camera
1 2
Figure 65: Connecting the HD monitor
1 HD-SDI video output 2 DVI-D video output
CAUTION!
Risk of injury due to electrical current!
Connecting unrecognized, defective or non-permitted accessories
to live ports may result in electric shock.
u
Connect only recognized, functioning and permitted acces-
sories to live ports.
u
When configuring your ME system, please make sure to comply
with the requirements of IEC 60601-1:2005+A1:2012, chapter
16.
Material • System cable DVI-D, 5 m
• Alternative: HD-SDI connecting cable 75 Ohm
with 2x BNC pin
Action 1. Connect the integrated HD camera's DVI-D video output to the
DVI-D video input on the HD monitor. The connector side with
the ferrite core must be plugged in on the suspension system.
Cable: system cable DVI-D, 5 m
2. Alternative: Connect the integrated HD camera's HD-SDI video
output to the BNC video input on the HD monitor. Cable: HD-
SDI connecting cable 75 Ohm with 2x BNC pin