Zeiss opmi lumera 700, Instructions For Use Manual

Page: 227 / 236

Instructions for Use Glossary
OPMI LUMERA 700
G-30-1673-en - 14.0 - 2018-07-12 227 / 236
Glossary
Automatic fuse
An overcurrent protection device which
switches the system off in the event of a
short.
BNC
BNC (Bayonet Neill Concelman) is a coaxial
connector with bayonet lugs for high-
frequency applications.
Composite
In composite video signals, color,
brightness and synchronization information
are combined and transmitted via a single
cable.
Depth of field
The range of depth that appears sharply
defined through the microscope.
DHCP
DHCP (Dynamic Host Configuration
Protocol) is a network configuration for
dynamically assigning IP addresses.
DIN
DIN (German standards association)
Diopter scale
Element of an eyepiece for reading off the
set refraction value.
Drapes
Sterile covers for surgical microscopes.
DVI
DVI (Digital Visual Interface) is an electronic
interface for the transfer of digital and
analog video content.
Electromagnetic compatibility (EMC)
EMC (electromagnetic compatibility) desig-
nates the usually desired state in which
technical devices do not impede each other
by undesired electric or electromagnetic
effects (non-interference).
Eyecup
Eyepiece control element used to shield the
eyepiece against scattered light during eye-
controlled focusing.
FCP
The FCP is a wired foot control panel.
HD-SDI
HD-SDI (High Definition Serial Digital
Interface) is a connection used to transmit
uncompressed video signals.
HF
HF (high frequency)
IDIS
Integrated Data Injection System
IEC
International Electrotechnical Commission
Incision/LRI
A CALLISTO eye assistance function for
positioning incisions and LRIs.
IOL
IOL (intraocular lens) is an artificial lens in
the eye.
IP
The IP (Internet Protocol) is a communica-
tions protocol to transfer data in the
Internet or a network.