Zeiss opmi lumera 700, Instructions For Use Manual

Page: 150 / 236

7 Operation Instructions for Use
OPMI LUMERA 700 7.4 Configuring the software for specific users
150 / 236 G-30-1673-en - 14.0 - 2018-07-12
Prerequisite
þ
The surgery profile you wish to configure is activated.
Action 1. Open the main menu.
2. Tap the [Additional Settings] menu button.
3. Tap the [RESIGHT] submenu button.
ð The "RESIGHT" menu will appear.
4. Configure the speed.
5. Activate or deactivate the [Two-step speed] button.
ð
Activated functions are illuminated blue.
6. To save the changes to the surgery profile: tap the
button.
7.4.7 Configuring the overhead display
The overhead display can be turned on or off. The brightness can
also be set between 0% and 100% in 1% increments. The factory
setting is 50%.
Prerequisite
þ
The surgery profile you wish to configure is activated.
þ
The device includes an overhead display.
Action 1. Open the main menu.
2. Tap the [Additional Settings] menu button.
3. Tap the [Overhead display] submenu button.
ð The "Overhead display" menu will appear.
4. Tap on the [Overhead display On] button to activate or
deactivate the overhead display.
ð
Activated functions are illuminated blue.
5. Set the desired brightness with the arrow buttons.
6. To save the changes to the surgery profile: tap the
button.
Tip: We recommend using a bright overhead display for operations
in the anterior segment of the eye. For operations in the posterior
segment of the eye, we recommend using a dim overhead display
or turning the display off.
7.4.8 Configuring fast focus
Fast focus [ } 82] is used to quickly switch between two different
focus levels. The distance can be set b5 mm and +40 mm
in 1 mm increments. The factory setting is +40 mm.