Zeiss opmi lumera 700, Instructions For Use Manual

Page: 188 / 236

10 Troubleshooting Instructions for Use
OPMI LUMERA 700 10.3 Faults (without messages)
188 / 236 G-30-1673-en - 14.0 - 2018-07-12
Fault Cause Remedy
Data cannot be displayed or played
back. Non-supported file format
imported or saved to the LAN.
u
Use supported file formats.
Video with incorrect video
system was imported or saved
to the LAN.
u
Set the device to the video
system for your country (PAL or
NTSC).
u
Restart the device.
USB storage device was
removed and reinserted in the
meantime. When the USB
storage device is removed, the
device automatically creates a
new, empty patient file.
u
Select the desired patient file.
[
}
165]
Integrated video and image
recording not functioning. USB storage device was
removed and reinserted
repeatedly during recording.
u
Restart the device after surgery.
Selected patient cannot be deleted. Patient is current patient.
u
Select another patient. [
}
165]
u
Delete the desired patient.
10.3.3 14-function foot control panel faults
Fault Cause Remedy
The 14-function foot control panel is
not functioning. The batteries are dead.
u
Replace the batteries.
The rechargeable batteries are
dead.
u
Replace the rechargeable
batteries.
Failure of individual button
functions.
u
Reconfigure the button
functions. This can only be done
if the buttons on the device are
configurable.
Radio link failure/fault.
u
Establish a cable connection.
[
}
198]
The 14-function foot control
panel's position sensor always
detects the rest position.
u
Establish a cable connection.
[
} 198]
Weak radio signal.
u
Establish a cable connection.
[
}
198]
No pairing with stand.
u
Perform pairing. [
}
140]
The surgery profile cannot be
changed via the configured button
on the 14-function foot control
panel. You are not in the main menu.
u
Return to the main menu.