Zeiss opmi lumera 700, Instructions For Use Manual

Page: 106 / 236

5 Daily startup Instructions for Use
OPMI LUMERA 700 5.1 Outfitting the surgical and assistant's microscopes with accessories
106 / 236 G-30-1673-en - 14.0 - 2018-07-12
Material • Tubes and eyepieces for surgical and
assistant's microscopes
• Objective lens
• As required: RESIGHT 500 or RESIGHT 700
fundus viewing system
• As required: VISULUX auxiliary illumination
system or FC oblique illumination system
• As required: coobservation components
Documents • Instructions for Use for the accessory or
component
Action 1. Place the suspension arm in a horizontal position. To do this,
pull the [Fixing suspension arm position] rotary knob out and
rotate it 180° to the right or left.
2. Move the suspension arm slightly upward and downward until
the lock snaps in.
ð
Now the suspension arm cannot swing upward.
3. Loosen the securing screw on the main observer and the
assistant's microscope a few turns counter clockwise.
4. Remove the dust protection covers and store both of them for
later use.