![background image](http://html2.mh-extra.com/html/zeiss/opmi-lumera-700/opmi-lumera-700_instructions-for-use-manual_3325017194.webp)
10 Troubleshooting
Instructions for Use
OPMI LUMERA 700
10.4 Troubleshooting work
194 / 236
G-30-1673-en - 14.0 - 2018-07-12
ð
The following message will appear on the control panel:
"OPMI light source: spare lamp is in use, please change
main lamp."
6. Acknowledge the error message.
7. Reset the remaining service hours counter to its initial value of
500. To do this, go to [System Settings] > [Tab 2] > [Lamp
service life] > [Reset] from the main menu.
ð
The following prompt will appear: "Do you want to reset
the service hours of the lamps?"
8. To reset the service hours: tap the [Yes] button.
ð
The remaining service hours will be reset to 500
Tip: To be safe, keep a backup lamp module with two new xenon
lamps at hand.
10.4.5 Changing the Superlux Eye light source lamp module
3
5
1
2
4
Figure 81: Changing the Superlux Eye light source lamp module
1
Bolt
2
Original transport packaging
3
Lamp module
4
Borehole
5
[Open lamp module] button
Summary of Contents for opmi lumera 700
