Instructions for Use
4 Installation
OPMI LUMERA 700
4.3 Connections
G-30-1673-en - 14.0 - 2018-07-12
103 / 236
4.3.6.2 Connecting the MEDIALINK 100 and SD monitor to the
integrated HD camera
1
2
Figure 66: Connecting the SD monitor via MEDIALINK
1
Y/C video output (green)
2
MEDIALINK 100 connector
panel
CAUTION!
Risk of injury caused by accessories falling down!
If the instrument tray is overloaded or accessories are insufficiently
secured, the risk of injury to the patient is increased.
u
Do not exceed the instrument tray’s load capacity of 13 kg.
u
Make sure that auxiliary equipment such as the MEDIALINK
100 is standing securely on the instrument tray.
u
Secure further accessories using the supplied straps.
Material
• S video cable out, 10m
• BNC - BNC cable, 10 m
• System cable DVI-D, 5m
Action
1. Connect the integrated HD camera's Y/C video output (green)
to the Y/C video input on the MEDIALINK 100. Cable: S video
cable out, 10m
2. Connect the MEDIALINK 100's Y/C, BNC or DVI-D video output
to the video input port on your SD video monitor. Cable: see
materials information
Summary of Contents for opmi lumera 700
