YOKOGAWA SL1400 ScopeCorder LITE User Manual Download Page 408

Page: 408 / 589

13-37

IM 701240-01E

Saving and Loading Data

App

Index

Explanation

The screen image data can be stored to a specified storage medium.

You can select the storage medium from the PC card, external SCSI device, internal

hard disk (option), and network drive (when the Ethernet interface option is installed). For

details on saving data to the network drive, see section 15.3.

Setting the Output Format

Data in the following formats can be saved to a specified storage medium. The extension

that is automatically attached and the data size (reference value) are indicated below.

Output Data Format

Extension

Data Size

PNG

*.PNG

Approx. 6 kbytes (Approx. 14 kbytes)

JPEG

*.JPG

Approx. 400k bytes (Approx. 400 kbytes)

BMP

*.BMP

Approx. 60 kbytes (Approx. 480 kbytes)

Post Script

*.PS

Approx. 123 kbytes

1. When color is OFF
2. The data size inside the parentheses is for the case when color is ON

Setting the Color (When Format Is BMP)

Select ON, ON(Revers), ON(Gray), or OFF.

ON:

Output using 256 colors.

ON(Revers): Do not output the background of the screen in color.

ON(Gray):

Output the data using a tint of 16 gray levels.

OFF:

Output in black and white.

Setting the Compression Format (When Format Is BMP and Color Is Not OFF)

When the output format is set to BMP, the data can be output by compressing using

RLE. However, data compression is not possible if the color is OFF.

Setting a Comment

A comment of up to 20 characters can be added to the lower section of the screen and

saved. Comments are optional. All characters (including spaces) can be used.

Setting the Save Destination: File List

The available storage medium is displayed in the File List window.

• Display Examples of Storage Media

[PC Card]:

PC card

[HD]:

Hard disk

[SCSI5]:

SCSI device with the ID number set to 5

[SCSI5-1]:

Partition 1 of a SCSI device whose ID number is 5

[NetWork]:

Network drive (when the Ethernet interface option is installed)

[USB]:

USB storage device

1. When a SCSI device whose ID number is 5 is connected

PC Card, Internal Hard Disk, External SCSI Device, and USB Storage Device

PC card, internal hard disk, external SCSI device, and USB storage device are described

in sections 13.2 to 13.5. For the formatting procedure, see section 13.6.

13.12 Saving Screen Image Data

Summary of Contents for SL1400 ScopeCorder LITE














































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SL1400 ScopeCorder LITE

Reviews:

Related manuals for SL1400 ScopeCorder LITE

Brands by name

Popular brands

YOKOGAWA SL1400 ScopeCorder LITE, User Manual

Search results

Summary of Contents for SL1400 ScopeCorder LITE

Reviews:

Related manuals for SL1400 ScopeCorder LITE

Brands by name

Popular brands