YOKOGAWA SL1400 ScopeCorder LITE User Manual Download Page 369

Page: 369 / 589

12-14

IM 701240-01E

Output Format

You can select the output format that is sent to the USB printer from the following five

types.

• ESC-P

• ESC-P2

• ESC-PR (a format for Seiko Epson printers)

• LIPS3

• PCL5

• BJ (can be used on models that support the BJC-35V native commands)

Print Size When Printing in ESC-PR Format (Size)

Select the print size when printing to a Seiko Epson printer that supports the USB.

• Normal: A4 size printer

• Small:

Postcard size printer

Output Resolution When Printing Using the BJ Format

When printing the screen image to a USB BJ printer, select the output resolution from

180 dpi, 300 dpi, 360 dpi, and 600 dpi.

Comment

A comment string of up to 0 characters can be printed at the bottom right section. The

comment setting is linked with the PRINT menu > Comment setting.

Color

Select from the following:

ON:

Print the data using colors similar to the screen. (No background color and grid

printed in black)

OFF: Prints the image using the same colors as the image printed using the built-in

printer.

Notes When Printing on the USB Printer

• Images may not print properly on some printers. Use USB printers that have been

tested for compatibility.

• You can also print to a USB printer that is connected to your PC. To do so, save the

screen image data to a PC card (see section 13.12). Then, load and print the data on

the PC.

Note

The SL1400 does not detect “out of paper” and printer errors on the USB printer. If an error
occurs, press PRINT again to stop the printing.

12.2 Printing on a USB Printer

Summary of Contents for SL1400 ScopeCorder LITE














































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SL1400 ScopeCorder LITE

Reviews:

Related manuals for SL1400 ScopeCorder LITE

Brands by name

Popular brands

YOKOGAWA SL1400 ScopeCorder LITE, User Manual

Search results

Summary of Contents for SL1400 ScopeCorder LITE

Reviews:

Related manuals for SL1400 ScopeCorder LITE

Brands by name

Popular brands