YOKOGAWA SL1400 ScopeCorder LITE User Manual Download Page 385

Page: 385 / 589

13-14

IM 701240-01E

13.8 Saving and Loading Waveform Data

CAUTION

Do not remove the storage medium (disk) or turn OFF the power when the

access indicator or the PC card or internal hard disk (option) icon is blinking.

Doing so can damage the storage medium or destroy the data on the medium.

Procedure

Saving the Waveform Data

Press

FILE

Press the

File Item

soft key. The File Item setup menu appears.

Press the

Waveform

soft key.

Selecting the Data Type

Press the

Data Type

soft key. The data type selection menu appears.

Press the

Binary

ASCII

, or

Float

soft key to select the data type.

Note

•

Binary files can be saved and loaded. ASCII and Float files can only be saved.

•

Select Real Time when loading or converting the waveform that has been realtime
recorded. For details, see section 13.15.

•

The data type is linked to the data type specified when Save to File is selected for the
action-on-trigger action (see section 6.18).

Selecting the Waveform to Be Saved

Press the

Save

soft key. The save setup menu appears.

Press the

Trace

soft key. The waveform selection menu appears.

Press the soft key corresponding to the desired channel to select the waveform.

Summary of Contents for SL1400 ScopeCorder LITE














































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SL1400 ScopeCorder LITE

Reviews:

Related manuals for SL1400 ScopeCorder LITE

Brands by name

Popular brands

YOKOGAWA SL1400 ScopeCorder LITE, User Manual

Search results

Summary of Contents for SL1400 ScopeCorder LITE

Reviews:

Related manuals for SL1400 ScopeCorder LITE

Brands by name

Popular brands