6-38
IM 701240-01E
Setting the Status of Each Bit of Logic A and Logic B
(Only when using logic input channels)
9.
Press the
Logic Pattern
soft key. The Logic Pattern setup dialog box appears.
10.
Use
jog SELECT
to select the status of each bit (Bit A1 to Bit A8 and
Bit B1 to Bit B8) from , , and –.
Selecting the Target Waveform
11.
Press the
Select CH
soft key. The channel selection menu appears.
12.
Use
jog SELECT
to select the target channel.
Setting the Window (When the Target Waveform Is Not Logic)
Setting the Center Level
13.
Press the
Center/Width
soft key to set the jog shuttle control to Center.
14.
Turn the
jog shuttle
to set the center level.
Setting the Window Width
15.
Press the
Center/Width
soft key to set the jog shuttle control to Width.
16.
Turn the
jog shuttle
to set the window width.
Setting the Hysteresis
17.
Press the
Hysteresis
soft key to select
,
, or
.
Setting the Hold Off
18.
Set the hold off time according to the procedures given in section 6.4.
6.16 Setting the Window Trigger (ENHANCED)
