YOKOGAWA SL1400 ScopeCorder LITE User Manual Download Page 362

Page: 362 / 589

12-7

IM 701240-01E

Printing the Screen Image

App

Index

Printing Using Normal Output Format

Comment

A comment string of up to 20 characters can be printed at the top section of the print

area.

Fine Print, Zoom Print, and A4 Print

Print Magnification (Print Mag)

Set the print magnification only during fine print and zoom print. The selectable range

varies depending on the record time setting and record length.

Print Range (Time Range1/Time Range2)

Set the print range only during fine print. Set the print range in the range of –5 divisions

to 5 divisions.

Zoom Box Z2 (Z2 Mag/Z2 Position)

Set zoom box Z2 only during zoom printing. The zoom box Z2 setting is linked to the

ZOOM menu setting. For details such as the selectable range, see section 8.5.

Print Setup

Format

Select the number of zones of the print area when printing on the built-in printer.

1 Zone

4 Zone

2 Zone

8 Zone

3 Zone

16 Zone

The format setting is linked with the DISPLAY menu > Format setting.

Extra Area

The extra area can be set only when the format is set to 1 Zone, 2 Zone, 3 Zone, or 4

Zone.

• When the Format Is 1 Zone

If extra area is turned ON, the top 16 cm of the print area (20 cm) is used to print

waveforms, and the remaining 4 cm is used to print waveform information (extra

area). Annotations (see page 12-9) and logic waveforms are printed in the extra

area. The default setting is OFF.

• When the Format is 2 Zone, 3 Zone, or 4 Zone

If extra area is turned ON, the area below each of the divided waveform recording

area is used to print the waveform information (extra area). If extra area is turned

OFF, the extra area between each waveform recording area disappears. The

magnification of the vertical axis of each waveform recording area is adjusted

automatically according to the paper size and printed. The default setting is ON.

12.1 Printing on the Built-in Printer

Summary of Contents for SL1400 ScopeCorder LITE














































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SL1400 ScopeCorder LITE

Reviews:

Related manuals for SL1400 ScopeCorder LITE

Brands by name

Popular brands

YOKOGAWA SL1400 ScopeCorder LITE, User Manual

Search results

Summary of Contents for SL1400 ScopeCorder LITE

Reviews:

Related manuals for SL1400 ScopeCorder LITE

Brands by name

Popular brands