15-8
IM 701240-01E
15.3 Saving/Loading Data to a Network Drive (FTP
Client Function)
<For a description of this function, refer to page 2-47.>
Procedure
1.
Press
MENU
.
2.
Press the
Next 1/2
soft key.
3.
Press the
Network
soft key.
4.
Press the
Net Drive Setup
soft key. The Net Drive setup menu appears.
Setting the FTP Server
5.
Use
jog shuttle
+
SELECT
to select FTP Server.
6.
Enter the IP address of the FTP server according to the procedure given in
section 4.2. When using DNS (section 15.2), you can specify the address by
name.
Setting the Login Name and Password
7.
Use
jog shuttle
+
SELECT
to select Login Name.
8.
Enter the login name using up to 15 characters according to the procedure given
in section 4.2.
9.
Use
jog shuttle
+
SELECT
to select Password.
10.
Enter the password corresponding to the login name using up to 15 characters
according to the procedure given in section 4.2.
Setting the Timeout Time
11.
Use
jog shuttle
+
SELECT
to set Time Out. The selectable range is 0 to 3600 (s).
Note
If Login Name is set to anonymous, you do not have to enter the password.
Connecting/Disconnecting to a Network Drive
12.
Use
jog shuttle
+
SELECT
to select Connect. Connection is made to the network
drive. When the connection is established,
is displayed at the upper right
corner of the screen.
Use the
jog shuttle
to move the cursor to Disconnect, then press
SELECT
to
close the connection. The
displayed at the upper right corner of the screen
disappears.
