YOKOGAWA SL1400 ScopeCorder LITE User Manual Download Page 180

Page: 180 / 589

5-43

IM 701240-01E

App

Index

Horizontal and Vertical Axes

Velocity

Distance/Pulse

Set the distance per pulse in the range of –9.9999E+30 to 9.9999E+30.

Time Unit

Set the time unit to hour, min, or sec.
The output is automatically converted to a velocity with respect to the specified time.

Unit

Set the unit of the velocity to be displayed on the screen using up to 4 characters. The default
setting is m/s.

Filter

Computation such as smoothing filter and pulse average can be performed depending

on the measurement item.

Smoothing

Set the moving average order of smoothing in the range of 0.0 to 1000.0 ms.

Pulse Average

Set the number of times to perform pulse average in the range of 1 to 4096.

Deceleration Prediction

Automatically computes and predicts the deceleration curve from the time elapsed since the
stopping of the pulse.

OFF

Disables deceleration prediction.

Stop Prediction

Set the time from the point when the pulse input stops to the point when the function

determines that the object has stopped.

The time can be set to

1.5,

3, ... ,

9, and

10 (10 settings) of the pulse period (T)

of the pulse one period before the pulse input stopped. If you select OFF, stop prediction

is not performed.

5.17 Setting the Frequency (Number of Rotations, Period, Duty Cycle, Power Supply Frequency, Pulse Width,

Pulse Integration, and Velocity) Measurement

Summary of Contents for SL1400 ScopeCorder LITE














































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SL1400 ScopeCorder LITE

Reviews:

Related manuals for SL1400 ScopeCorder LITE

Brands by name

Popular brands

YOKOGAWA SL1400 ScopeCorder LITE, User Manual

Search results

Summary of Contents for SL1400 ScopeCorder LITE

Reviews:

Related manuals for SL1400 ScopeCorder LITE

Brands by name

Popular brands