YOKOGAWA SL1400 ScopeCorder LITE User Manual Download Page 384

Page: 384 / 589

13-13

IM 701240-01E

Saving and Loading Data

App

Index

Explanation

The SCSI ID number is used to distinguish between the various devices connected to

the SCSI chain. Make sure not to use duplicate ID numbers on any of the connected

devices.

Selectable Range of Own ID Number

Own ID (the ID number of the SL1400) can be set in the range of 0 to 7. The default

value is 6.

Selectable Range of Internal ID Number

Internal ID (ID number of the internal hard disk (option) can be set in the range of 0 to 7.

The default value is 4.

Notes When Setting the ID Number

• If you change the ID number, make sure to press the Initialize SCSI soft key.

• Do not set the same SCSI ID number for the external SCSI device and the internal

hard disk of the SL1400.

• The SCSI ID numbers of external SCSI devices are automatically detected when the

SL1400 is turned ON.

• If you change the ID number of the external SCSI device, make sure to execute

Initialize SCSI to detect the new SCSI ID.

• Own ID and Internal ID cannot be set to the same value.

13.7 Changing the SCSI ID Number

Summary of Contents for SL1400 ScopeCorder LITE














































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SL1400 ScopeCorder LITE

Reviews:

Related manuals for SL1400 ScopeCorder LITE

Brands by name

Popular brands

YOKOGAWA SL1400 ScopeCorder LITE, User Manual

Search results

Summary of Contents for SL1400 ScopeCorder LITE

Reviews:

Related manuals for SL1400 ScopeCorder LITE

Brands by name

Popular brands