YOKOGAWA SL1400 ScopeCorder LITE User Manual Download Page 428

Page: 428 / 589

13-57

IM 701240-01E

Saving and Loading Data

App

Index

Selecting the Copy Source Files at Once

Turn the

jog shuttle

to select the file, directory, or medium.

Press the

All set

soft key. Asterisks (*) are displayed to the left of every file in

the directory containing the selected file or directory to indicate that they will be

copied. At the same time, the

All Set

soft key changes to an

All Reset

soft key.

Resetting the Selected Copy Source Files at Once

10.

Press the

All Reset

soft key. Asterisks (*) are removed from the left of every file

in the directory containing the selected file or directory to indicate that they will

not be copied. At the same time, the

All Reset

soft key changes to an

All Set

soft key.

Selecting the Copy Destination

11.

Press the

Dest Dir

soft key. The copy execution menu and the copy destination

File List window appears.

Selecting Copy Destination Medium and Directory

12.

Select the copy destination medium and directory according to steps 6 to 9 in

section 13.9.

Executing the Copy Operation

13.

Press the

Copy Exec

soft key. All the copy source files with asterisk marks are

copied.

Specifying the File to Be Displayed in the File List Window and Viewing File Properties

14.

Carry out steps 19 to 21 in section 13.9.

13.17 Copying Files

Summary of Contents for SL1400 ScopeCorder LITE














































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SL1400 ScopeCorder LITE

Reviews:

Related manuals for SL1400 ScopeCorder LITE

Brands by name

Popular brands

YOKOGAWA SL1400 ScopeCorder LITE, User Manual

Search results

Summary of Contents for SL1400 ScopeCorder LITE

Reviews:

Related manuals for SL1400 ScopeCorder LITE

Brands by name

Popular brands