YOKOGAWA SL1400 ScopeCorder LITE User Manual Download Page 245

Page: 245 / 589

7-9

IM 701240-01E

App

Index

Waveform Acquisition

7.5

Realtime Recording to the Internal Hard Disk
(Option)

<For a description of this function, refer to page 2-31.>

CAUTION

• If the power is cut off when realtime recording is in progress, a disk area that

cannot be freed may result in the realtime recording area or damage may occur

to the internal hard disk.

If a disk area that cannot be freed results, the disk performance in the realtime

area may deteriorate. Consequently, realtime recording may not operate

properly. If this happens, back up the required data on the internal hard disk and

format the internal hard disk.

• Do not apply shock to the SL1400 when realtime recording is in progress.

Damage may occur to the internal hard disk, or the realtime recording may not

operate properly.

• An icon

in the upper left part of the screen blinks when realtime recording is

in progress. Do not remove or insert the USB storage device* connected to the

USB connector (for peripherals) while the icon is blinking. The SL1400 may stop

functioning properly, or data may become corrupted during realtime recording.

A memory device connected to a USB connector such as an MO disk drive, hard disk, or
flash memory.

• The Real Time drive is a working area on the SL1400 internal hard disk for

realtime recording. Never delete files from the drive or add files to the drive from

an external PC such as by using the FTP server function. If you do, the realtime

recording may not operate properly.

Procedure

Press

MENU

Press the

ACQ

soft key.

Press the

RealTime Out

soft key to select HD.

Note

The RealTime Out menu does not appear if Time Base is set to Ext.

Setting the Realtime Recording

Press the

RealTime Out Setup

soft key. A setup dialog box opens.

Use the

jog SELECT

to set Sequence to Single or Continue.

If you select Continue in step 5, use the

jog SELECT

to set Count to a

value in the range of 2 to 128.

Use

jog SELECT

to select the auto naming method from OFF,

Numbering, and Date.

As necessary, enter the File Name and Comment according to the procedures

given in section 4.2.

Executing the Realtime Recording

Press

START/STOP

to start the waveform acquisition. Realtime recording is

executed.

While realtime recording is executing,

is displayed in the upper left of the screen.

Aborting the Realtime Recording

10.

Press

START/STOP

to stop the waveform acquisition. Realtime recording is

aborted.

Summary of Contents for SL1400 ScopeCorder LITE














































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SL1400 ScopeCorder LITE

Reviews:

Related manuals for SL1400 ScopeCorder LITE

Brands by name

Popular brands

YOKOGAWA SL1400 ScopeCorder LITE, User Manual

Search results

Summary of Contents for SL1400 ScopeCorder LITE

Reviews:

Related manuals for SL1400 ScopeCorder LITE

Brands by name

Popular brands