YOKOGAWA SL1400 ScopeCorder LITE User Manual Download Page 95

Page: 95 / 589

3-13

IM 701240-01E

App

Index

Preparations for Measurements

3.6

Setting the Date and Time

Procedure

Press

MENU

Press the

Next 1/2

soft key.

Press the

System Config

soft key.

Press the

Date/Time

soft key. The Date/Time dialog box opens.

Turning ON/OFF the Date/Time display

Use

jog SELECT

to set Display to ON or OFF.

Setting the Time and Date Manually (Manual)

Use

jog SELECT

to set Type to Manual.

Use

jog SELECT

to set Date Year.

Likewise, set the Month, Day, Time Hour, Minute, and Second.

Use the

jog shuttle

to move the cursor to Set and press

SELECT

. The date and

time specified in steps 6 to 8 are applied.

Setting the Date and Time Using the SNTP Server (Option)

To obtain the time from the SNTP server, you must first connect to the network and

then to the SNTP server. For details, see sections 15.2 and 15.8.

10.

After step 5, use

jog SELECT

to set Type to SNTP.

11.

Use

jog SELECT

to set Time Hour under Time Difference from GMT.

12.

Likewise, set Minute.

13.

Use the

jog shuttle

to move the cursor to Set and press

SELECT

. The time is

obtained from the SNTP server, and the date and time calculated from the

specified GMT time difference are set.

Summary of Contents for SL1400 ScopeCorder LITE














































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SL1400 ScopeCorder LITE

Reviews:

Related manuals for SL1400 ScopeCorder LITE

Brands by name

Popular brands

YOKOGAWA SL1400 ScopeCorder LITE, User Manual

Search results

Summary of Contents for SL1400 ScopeCorder LITE

Reviews:

Related manuals for SL1400 ScopeCorder LITE

Brands by name

Popular brands