YOKOGAWA SL1400 ScopeCorder LITE User Manual Download Page 394

Page: 394 / 589

13-23

IM 701240-01E

Saving and Loading Data

App

Index

13.9 Saving/Loading the Setup Data

CAUTION

Never remove the storage medium (disk) or turn OFF the power while the

access indicator or the PC card or internal hard disk (option) icon is blinking.

Such acts can damage the storage medium or destroy the data on the medium.

Procedure

Saving the Setup Data

Press

FILE

Press the

File Item

soft key. The File Item setup menu appears.

Press the

Setup

soft key.

Selecting Save Destination Medium

Press the

Save

soft key. The save setup menu appears.

Press the

File List

soft key. The File List window appears.

Turn the

jog shuttle

to select the save destination medium (indicated by

brackets).

Press

SELECT

to confirm the storage medium.

Selecting the Destination Directory

(Perform this operation when directories are present on the medium.)

Turn the

jog shuttle

to select the save destination directory (indicated by < >).

Press

SELECT

to confirm the directory. The selected medium/directory is

displayed in “Path=......” located above and to the left of the File List window.

Select <..> to move to the parent directory.

Summary of Contents for SL1400 ScopeCorder LITE














































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SL1400 ScopeCorder LITE

Reviews:

Related manuals for SL1400 ScopeCorder LITE

Brands by name

Popular brands

YOKOGAWA SL1400 ScopeCorder LITE, User Manual

Search results

Summary of Contents for SL1400 ScopeCorder LITE

Reviews:

Related manuals for SL1400 ScopeCorder LITE

Brands by name

Popular brands