YOKOGAWA SL1400 ScopeCorder LITE User Manual Download Page 375

Page: 375 / 589

13-4

IM 701240-01E

13.3 Internal Hard Disk (Option)

CAUTION

• When using the SL1400 in a vibrating environment, turn OFF the motor rotation

of the internal hard disk.

• Do not place more than 512 files in the root directory of the internal hard disk. If

the number of files exceeds 512, all file access operations slows down. In

addition, the operation of realtime recording cannot be guaranteed.

• If an external SCSI device is connected, do not change the HDD Motor setting.

Procedure

Press

MENU

Press the

Next 1/2

soft key.

Press the

Others

soft key.

Press the

HDD Motor

soft key to select ON or OFF.

Explanation

You can turn ON/OFF the motor rotation of the internal hard disk on the SL1400.

If you turn OFF the internal hard disk motor, the internal hard disk cannot be accessed.

To save various data to the internal hard disk, turn the HDD Motor ON.

Turning OFF the HDD Motor protects the internal hard disk from vibrations.

Note

Even if the motor rotation is turned OFF, the motor rotation is turned ON for approximately 1
minute after the power is turned ON.

Summary of Contents for SL1400 ScopeCorder LITE














































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SL1400 ScopeCorder LITE

Reviews:

Related manuals for SL1400 ScopeCorder LITE

Brands by name

Popular brands

YOKOGAWA SL1400 ScopeCorder LITE, User Manual

Search results

Summary of Contents for SL1400 ScopeCorder LITE

Reviews:

Related manuals for SL1400 ScopeCorder LITE

Brands by name

Popular brands