Yamaha WR250F(N), Owner'S Service Manual

Page: 580 / 686

5 - 57
CHAS
SWINGARM
Swingarm
1. Install:
●
Bushing 1
●
Thrust bearing 2
●
Oil seal 3
●
Collar 4
To swingarm 5 .
NOTE:
Apply the molybdenum disulfide grease on the
bushings, thrust bearings and oil seal lips.
2. Install:
●
Collar 1
To relay arm 2 .
NOTE:
Apply the molybdenum disulfide grease on the
collars, bearings and oil seal lips.
3. Install:
●
Collar 1
To connecting rod 2 .
NOTE:
Apply the molybdenum disulfide grease on the
collar, bearings and oil seal lips.
4. Install:
●
Connecting rod 1
●
Bolt (connecting rod) 2
●
Washer 3
●
Nut (connecting rod) 4
To relay arm 5 .
NOTE:
Apply the molybdenum disulfide grease on the
bolt.
CAUTION:
Install the nut on the left side of the chas-
sis. If you make a mistake in its installation
position, the nut contacts the swingarm
when stroking the rear shock absorber.
T
R .
.
80 Nm (8.0 m · kg, 58 ft · lb)