Yamaha WR250F(N), Owner'S Service Manual

Page: 220 / 686

3 - 27
INSP
ADJ
FRONT BRAKE ADJUSTMENT
3. Install:
●
Protector (rear brake)
●
Diaphragm
●
Reservoir cap
NOTE:
If bleeding is difficult, it may be necessary to
let the brake fluid system stabilize for a few
hours. Repeat the bleeding procedure when
the tiny bubbles in the system have disap-
peared.
j. Add brake fluid to the level line on the
reservoir.
WARNING
Check the operation of the brake after
bleeding the brake system.
EC362040
FRONT BRAKE ADJUSTMENT
1. Check:
●
Brake lever position
a
Brake lever position
a
:
Standard position Extent of adjustment
95 mm
(3.74 in)
76 ~ 97 mm
(2.99 ~ 3.82 in)
2. Adjust:
●
Brake lever position
Brake lever position adjustment steps:
●
Loosen the locknut 1 .
●
Turn the adjusting bolt 2 until the lever
position
a
is within specified position.
●
Tighten the locknut.
T
R
.
.
Locknut:
5 Nm (0.5 m • kg, 3.6 ft • lb)
CAUTION:
Be sure to tighten the locknut, as it will
cause poor brake performance.
2
1