Yamaha WR250F(N), Owner'S Service Manual

Page: 192 / 686

3 - 14
INSP
ADJ
10. Install:
●
Air filter element 1
●
Washer
●
Fitting bolt
NOTE:
Align the projection
a
on filter guide with the
hole
b
in air filter case.
T
R
.
.
2 Nm (0.2 m · kg, 1.4 ft · lb)
ENGINE OIL LEVEL INSPECTION
1. Start the engine, warm it up for several
minutes, and then turn off the engine and
wait for five minutes.
2. Place the machine on a level place and
hold it up on upright position by placing
the suitable stand under the engine.
3. Remove:
●
Oil tank cap 1
4. Inspect:
●
Oil level
Oil level should be between maximum
a
and minimum
b
marks.
Oil level is low
→
Add oil to proper
level.
NOTE:
When inspecting the oil level, do not screw the
oil tank cap into the oil tank. Insert the gauge
lightly.
ENGINE OIL LEVEL INSPECTION