Yamaha WR250F(N), Owner'S Service Manual

Page: 554 / 686

5 - 44
CHAS
HANDLEBAR
4. Install:
●
Collar 1
●
Throttle cables 2
To tube guide 3 .
NOTE:
Apply the lithium soap base grease on the
throttle cable end and tube guide cable wind-
ing portion.
5. Install:
●
Throttle cable cap 1
●
Screw (throttle cable cap) 2
●
Cover (throttle cable cap) 3
WARNING
After tightening the screws, check that the
throttle grip
4 moves smoothly. If it does
not, retighten the bolts for adjustment.
T
R
.
.
4 Nm (0.4 m · kg, 2.9 ft · lb)
6. Install:
●
Brake master cylinder 1
●
Brake master cylinder bracket 2
●
Bolt (brake master cylinder bracket) 3
NOTE:
●
Install the bracket so that the arrow mark
a
faces upward.
●
First tighten the bolt on the upper side of the
brake master cylinder bracket, and then
tighten the bolt on the lower side.
T
R
.
.
9 Nm (0.9 m · kg, 6.5 ft · lb)