5 - 36
CHAS
FRONT FORK
13. Check:
●
Inner tube smooth movement
Tightness/binding/rough spots
→
Repeat the steps 2 to 12.
14. Compress the front fork fully.
15. Fill:
●
Front fork oil
Until outer tube top surface with recom-
mended fork oil
1
.
CAUTION:
●
Be sure to use recommended fork oil. If
other oils are used, they may have an
excessively adverse effect on the front
fork performance.
●
Never allow foreign materials to enter the
front fork.
Recommended oil:
Suspension oil “01”
16. After filling, pump the damper rod
1
slowly up and down more than 10 times
to distribute the fork oil.
17. Fill:
●
Front fork oil
Until outer tube top surface with recom-
mended fork oil once more.
18. After filling, pump the outer tube
1
slowly
up and down (about 200 mm (7.9 in)
stroke) to distribute the fork oil once
more.
NOTE:
Be careful not to excessive full stroke. A stroke
of 200 mm (7.9 in) or more will cause air to
enter. In this case, repeat the steps 15 to 18.
Summary of Contents for WR250F(N)
Page 600: ...5 67 CHAS REAR SHOCK ABSORBER 8 Install Band 1 Taillight connector 2 ...
Page 684: ......
Page 685: ......