Network Configuration
WorkCentre 7755/7765/7775 Multifunction Printer
System Administrator Guide
46
NTP
Network Time Protocol (NTP) is used to synchronize the internal clocks of computers over a network
connection at system startup and every subsequent 24-hour period thereafter. This feature ensures
that the printer’s internal clock stays synchronized with the NTP server you specify. If the printer is
configured to use DHCP and an NTP server, or if the Greenwich Mean Time (GMT) offset is provided by
the DHCP server, then data entered on this page is overwritten by the corresponding parameters
retrieved from the DHCP server.
CAUTION:
Enabling NTP or modifying NTP settings causes the printer to restart.
Note:
If your printer is locked, you must log in as a system administrator. For details, see
Accessing
CentreWare IS
on page 17.
1.
In CentreWare IS, click
Properties
>
Connectivity
>
Protocols
>
NTP
.
2.
Under
Offset of Greenwich Mean Time
, select the number of hours your local time is offset from
GMT.
3.
Under
Network Time Protocol
, select
Enabled
to enable the protocol.
4.
Select either
IPv4
or
Host Name
for the address type of the NTP server.
5.
Type the appropriately formatted addresses and port numbers in the
Primary Server
and, if
needed, the
Alternate Server
address fields. The default port number is 123.
6.
Click
Apply
.
Summary of Contents for WORKCENTRE 7755
