Network Configuration
WorkCentre 7755/7765/7775 Multifunction Printer
System Administrator Guide
31
7.
Click
Apply
.
8.
Click
OK
.
Adding IPX Trap Destination Addresses
Internetwork Packet eXchange (IPX) is a routing protocol used by Novell NetWare environments.
Note:
If your printer is locked, you must log in as a system administrator. For details, see
Accessing
CentreWare IS
on page 17.
1.
In CentreWare IS, click
Properties
>
Connectivity
>
Protocols
>
SNMP
.
2.
Click
Advanced Settings
at the bottom of the page.
3.
Under
Trap Destination Addresses
, click
Add IPX Address
.
4.
Type the 8-digit hexadecimal number that identifies the
IPX External Network
host configured to
receive the trap.
5.
Type the 48-bit
Physical MAC Address
of the computer running the SMNP manager application
that is to receive the trap.
6.
Type the
IPX Socket Number
of the computer running the SNMP manager application configured
to receive the packets.
7.
Under
Traps
, select the type of
Traps to be Received
by the SNMP manager.
Summary of Contents for WORKCENTRE 7755
