Network Configuration
WorkCentre 7755/7765/7775 Multifunction Printer
System Administrator Guide
43
POP3
Post Office Protocol, version 3 (POP3) is a protocol that allows email clients to retrieve email from
remote servers over TCP/IP on network port 110. This printer uses POP3 for the Internet Fax service.
Note:
If your printer is locked, you must log in as a system administrator. For details, see
Accessing
CentreWare IS
on page 17.
1.
In CentreWare IS, click
Properties
>
Connectivity
>
Protocols
>
POP3 Setup
.
2.
Select the address type. Options are
IPv4
and
Host Name
.
3.
Type the appropriately formatted address and port number in the
POP3 Server
field. The default
port number is 110.
4.
Type the
Login Name
assigned to the printer that will be used to log in to the POP3 server.
5.
Type then retype an alphanumeric
password
.
6.
Enable
to save new password
.
7.
Under
POP3 Settings
, select
Enable receipt of Email via POP3
.
8.
Type a
Polling Interval
value between 1 and 60 minutes. The default value is 15 minutes.
9.
Click
Apply
.
Summary of Contents for WORKCENTRE 7755
