![background image](http://html2.mh-extra.com/html/xerox/workcentre-7755/workcentre-7755_system-administrator-manual_4280289107.webp)
Scanning
WorkCentre 7755/7765/7775 Multifunction Printer
System Administrator Guide
107
Note:
HTTP/HTTPS scans to a Web server using a CGI script.
FTP
Before you begin:
•
Ensure that FTP services are running on the server or computer to be used to store scanned image
files. Note the IP address or host name. Set the FTP mode on the printer if needed. See
FTP
on
page 28.
•
Create a user account and password with read and write access for the printer to use to access the
repository folder. Note the user name and password.
•
Create a folder within the FTP root. Note the directory path, user name, and password. This is your
file repository.
•
Test the connection. Log into the file repository from a computer with the user name and
password. Create a new folder in the directory, then delete it. If you cannot do this, check the user
account access rights.
Configuring Repository Settings for FTP
Note:
If your printer is locked, you must log in as a system administrator. For details, see
Accessing
CentreWare IS
on page 17.
1.
In CentreWare IS, click
Properties
>
Services
>
Workflow Scanning
>
File Repository Setup
.
2.
Click
Add New
.
3.
Type a name for the repository in the
Friendly Name
field.
4.
Select
FTP
from the
Protocol
drop-down menu.
5.
Select the address type. Options include
IPv4
,
IPv6
, or
Host Name
.
6.
Type the appropriately formatted address and port number in the
Address: Port
field for the FTP
location.
7.
In the
Document Path
field, type the directory path of the folder beginning at the root of FTP
services. Example:
/directoryname/foldername
.
8.
Under
Login Credentials to Access the Destination
, select one of the following:
•
Authenticated User and Domain
:
The authentication server validates the user credentials
prepended by the domain name against the LDAP server.
•
Authenticated User
: The authentication server validates the user credentials against the
LDAP server.
•
Prompt at User Interface
: Users type their credentials at the control panel.
•
System
: Login name and password credentials are specified in this field and stored in the
printer. The printer uses the system credentials to log into the file server.
9.
Type the
Login Name
and
Password
if the system will be directly accessing the file server.
10. Click
Save
.
NetWare NCP
Before you begin:
•
Enable and configure Netware protocol settings. For details, see
NetWare
on page 48.
Summary of Contents for WORKCENTRE 7755
