Security
WorkCentre 7755/7765/7775 Multifunction Printer
System Administrator Guide
57
Configuring Authentication Server Settings for Kerberos (Solaris)
Note:
If your printer is locked, you must log in as a system administrator. For details, see
Accessing
CentreWare IS
on page 17.
1.
On the
Authentication Configuration
page, click
Configure
next to
Authentication Server
.
2.
Under
Authentication Type
, select
Kerberos (Solaris)
.
3.
Under
Default Key Distribution Center (Required)
, in
Realm
, type the realm for your
authentication server.
4.
Select the desired address type. Options are
IPv4 Address
,
IPv6 Address
, or
Host Name
.
5.
Type the appropriately formatted address type and port numbers for both the primary and
backup addresses in the address fields. The default port number is 88.
6.
A backup address is optional.
7.
Under
Alternate Key Distribution Centers
type the realm or domain names, IP addresses,
primary ports, and backup ports of any alternate servers you want to use.
8.
Click
Save
.
Configuring Authentication Server Settings for Kerberos (Windows 2000/2003)
Note:
If your printer is locked, you must log in as a system administrator. For details, see
Accessing
CentreWare IS
on page 17.
1.
On the
Authentication Configuration
page, click
Configure
next to
Authentication Server
.
2.
Under
Authentication Type
, select
Kerberos (Windows 2000/2003)
.
3.
Under
Default Domain Controller (Required)
, in
Domain
, type the domain name of your
authentication server.
4.
Select the desired address type. Options are
IPv4 Address
,
IPv6 Address
, or
Host Name
.
5.
Type the appropriately formatted address type and port numbers for both the primary and
backup addresses in the address fields. The default port number is 88.
Note:
A backup address is optional.
6.
Under
Alternate Domain Controllers
type the domain names, IP addresses, primary ports, and
backup ports of any alternate servers you want to use.
7.
Click
Save
.
Configuring Authentication Server Settings for SMB
Note:
If your printer is locked, you must log in as a system administrator. For details, see
Accessing
CentreWare IS
on page 17.
1.
On the
Authentication Configuration
page, click
Configure
next to
Authentication Server
.
2.
Under
Authentication Type
, select
SMB (Windows NT 4)
or
SMB (Windows 2000/2003)
.
3.
Under
Default Domain
, type the domain name of your authentication server.
4.
If you want to specify domain controller IP addresses or host names, select
Optional
Information
.
Note:
Address options do not display unless you have selected Optional Information.
5.
Select the address type. Options are
IPv4 Address
, or
Host Name
.
Summary of Contents for WORKCENTRE 7755
