Customization and Expansion
WorkCentre 7755/7765/7775 Multifunction Printer
System Administrator Guide
173
Auxiliary Interface Kit
An Auxiliary Interface Kit, or a Foreign Device Interface kit, is a third-party access and accounting
device such as a coin operated printer accessory or a card reader that can be attached to the printer.
Installation instructions are included with the Foreign Device Interface Kit. After the kit is installed, you
must enable Auxiliary Access at the control panel.
Note:
If your printer is locked, you must log in as a system administrator. For details, see
Initial
Setup at the Control Panel
on page 15.
1.
At the printer control panel, press the
Machine Status
button, then touch the
Tools
tab.
2.
Touch
Accounting Settings
>
Accounting Enablement
, then touch
Accounting Mode
.
3.
Touch
Auxiliary Access
.
4.
Touch
Auxiliary Device Type
and select your printer type.
5.
Touch
Save
twice.
To configure accounting, see
Accounting
on page 143.
To configure authentication, see
Local Authentication
on page 55.
Summary of Contents for WORKCENTRE 7755
