Xerox ColorQube 9301, User Manual

Page: 61 / 260

Fax Options
ColorQube 9301/9302/9303 Multifunction Printer
User Guide
61
Fax Options
The Fax Options allow you to specify how the fax document is transmitted, how it is printed at the
receiving fax machine, and how to print confirmation report after performing these tasks. To access the
Fax Options, press the Services Home button, touch Fax , and touch the Fax Options tab.
Confirmation Report
Touch Confirmation Report to print a broadcast report to identify the success or failure of a fax job.
The options displayed depend on the settings enabled in Tools . Refer to Administration and
Accounting on page 195 for more information.
The options are:
Print Confirmation
• Use to print a transmission report containing details about the fax, together with a reduced copy
of the first faxed page.
• The Confirmation report is printed after every transmission.
• When sending a fax to multiple recipients, one report is printed listing all the recipients.
Print On Error Only
• Touch this option to print the Confirmation report only if an error occurs with the transmission.
• Touch OK to save the selections and exit.
Starting Rate
Use Starting Rate to select the speed at the printer starts transmitting the fax job. A high starting

rate should be used in good transmission areas, and a low rate should be used in poor quality areas.
The options are:
Super G3 (33.6 Kbps)
• Determines the transmission rate to be used, based on the maximum capabilities of the receiving
fax machine.
• This rate minimizes transmission errors by using Error Correction Mode (ECM). The initial
transmission speed is 33,600 Bits Per Second (bps).
G3 (14.4 Kbps)
• Selects the transmission rate, based on the maximum capabilities of the receiving fax machine.
• Initial transmission speed is 14,400 BPS. This rate minimizes transmission errors by using ECM.